Home › Products › Telemetry & Networking › Packaged Repeater
Network Infrastructure
Packaged Repeater
50386P50386P/A2
When field sites can't reach your base station directly, a repeater on high ground receives their reports and retransmits them onward. HydroLynx repeaters ship as complete packaged units — and because a good repeater site is often a good monitoring site, variants add rain, level or weather sensing to the same standpipe.
Configure this in the Selector → Download 50386P datasheet (PDF)
What's in the box — and what you decide
Included in every repeater
- Repeater electronics 50386RP
- High-gain antenna DB224 / DB408
- Standpipe enclosure
- Gel-cell battery, 18 Ah 5031-18
- Solar panel 5033-3.0B
- ALERT2 store-and-forward (on /A2)
Options you can add
- Radio power amplifier, 20 W RPA-T
- Access door for standpipe 50386P-D
- Standpipe ground kit 5054SG
- Antenna lightning protection 5050LA
You must specify at order
- Radio: Maxon 5 W standard; Ritron 5 W or 30 W specify
- Transmit and receive frequencies specify
- Antenna frequency for the DB224/DB408 specify
Pick your configuration
| Configuration | Model | Adds to the standard repeater |
|---|---|---|
| Standard repeater | 50386P/A2 | — |
| Dual radio | 50386P-2/A2 | Second radio and second antenna connector for split paths |
| + Rainfall | 50386P-54/A2 | Rain-gauge top section 5054TS on the repeater standpipe |
| + Water level | 50386P-90/A2 | Submersible pressure transducer 5050LL-PTD (specify range) |
| + Weather | 50386P-81/A2 | Full weather-station sensor suite |
Legacy ALERT versions of every configuration are available without the /A2 suffix.